Hieu T.
This was super easy to install. I literally removed the Tesla Factory plastic from my screen and installed this. I noticed that you have to apply a little more pressure but it works well!!! I highly recommend!!!
M U.
The screen protector itself is great. It greatly reduces fingerprints and glare. It comes well protected in a nice packaging.
However, the cloth that came with it left some small lints that got under it and made installing it a nightmare.
The provided guide stickers are way too weak to be of any help.
Removing some of the bubbles was not that easy either.
After maybe 30 min using the wipes provided I finally managed to get rid of most of the lints and install it, although there’s one lint left below the screen.
Brian S.
Maybe mine is defective but the protector is not cut properly so the corner and bottom of screen is a little unprotected.
David C.
took off the plastic rapper that came with the car when I bought it and put this one on directly after, worked great, looks good. I can highly recommend this.
S P.
I was sort of concerned with the center console display when I took delivery. Any sort of hard impact could cause a few thousand of damage. The screen also seems to be extremely sticky and causes too many finger prints. When installing, I used a piece of scotch tape to align the display perfectly. Make sure the display is fully wiped down to avoid any bubbles. Overall, I am satisfied with the purchase. Wished it was a matte finish to avoid glare, but guess that's for another time!
Essly P.
So happy I bought this, wasn’t sure if I need it, but since I usually protect my phone’s glass case, why not this? Fit perfectly and easy to install and doesn’t interfere with the sensitivity of the original interface.
A C.
It's fairly easy to install the screen protector but took me sometime to do it. I struggled a little bit initially to remove the air bubbles, but eventually got everything removed. Once this has been installed properly you wont even notice that there is a screen protector. Touch and display performance seem to be the same as before installation. It's a great product and I would recommend it. Make sure that you are not in a rush before the installation, take your time and get all the air bubbles out properly.
A P.
This screen protector is easy to install (Make sure the glass on your monitor is spotless first). Following the easy instructions especially starting from the top and slowly working your way down to the bottom to avoid air bubbles. The functionality of my monitor remain the same. The monitor is responsive as if no screen protector was there. Great Product
Elle
Sometimes I hit my screen with my ring and worry I scratched it, but then i remember that I have this screen protector. I have no dislikes for this product, but I do believe there is a true top and bottom to the screen protector, since I see that the bottom of the screen is slightly curved. So I know I put the protector upside-down (its curve is at the top), but it's hard to notice and I forget. Maybe I didn't read the instructions carefully? Lol either way, I forget I messed that up and forget that it's even there cause it's not too thick and not too noticeable. I'm glad I chose this one over other screen protectors.
Balan A.
Easy to install, perfect fit and touch screen works flawlessly. The screen protector is invisible to the eye.
J D.
Installed our new Tesla 3. The packaging was very good and protected the screen protector from being damaged during shipping. It fits the Tesla 3 screen perfectly. It seems thick enough (thicker than typical phone screen protector) to provide adequate protection against scratches.
Robert P.
Nice addition. Easy install and good protection
Shyam G.
Well made screen protector. Priced right. Good adhesion. Package includes everything needed to make install a breeze.
Chris T.
The screen shape is slightly different on top vs bottom, so make sure to check the right orientation before applying screen protector. It's a perfect cut, excellent quality.
David S.
The fit is great and product is good, but I think as a result of the oleo-phobic coating (which is standard on basically all glass based screen protectors) you will get a "rainbow effect" with polarized sunglasses.
I'm hoping I can get used to it, because the only other option are the matte plastic screen protectors, which can dim the screen quite a bit...so I'm going to try and stick with this for a while.
I think im getting used to it...but be warned...
S L.
Love this screen protector! The Tesla monitor is a fingerprint magnet - I’d have to wipe it off every day to keep it clean. This screen protector does a great job keeping the fingerprints out! In addition, it’s easy to install and gives me great peace of mind. Installation was easy - wipe it down, get all the dust out, and put the screen protector on. I had to move it a couple of times to get it right (didn’t attach it all the way), and it worked out well! I had a slight issue and the seller responded very quickly - excellent customer service!
Jack B.
xI had a similar product prior to this and somehow roughed up the top edge and cracked it with my watch wristband. I bought this replacement and it works very well. The protecter was extremely well packaged to avoid any damage in transport or opening of the package. It included a microfober cloth and wet/dry rubs to remove dirt and dust from the screen. Instructions were easy to follow and I was able to easily install and remove all the underlying bubles within 30 seconds. Radius almost matches perfectly in the corners. Screen touch is not an issue and adhesion seems very secure. I also registered the protecter for a 12 month warranty.
Jeremiah
Great product. Fits well, easy installation and the touch controls work very well after it is installed.
Clark
Glad I ordered this but would recommend putting it on when the car is new. Came with easy to follow instructions. Install was easy. Once its one you can't even tell anything is on the screen. Great quality.
Dicester
We purchased one of your products, LCD screen protector for the Tesla model 3. Installation was seamless, and the glass protector appears to be high quality. My only feedback would be that the screen protector does not fit the screen 100% (more like 99% of the screen). There is a small millimeter gap at the bottom of the Model 3 screen. This bevel maybe a 2019 model 3 design flaw or the screen protector did not take into account the size. Antiglare does not work as you can see in the photo. Overall, I am happy with the product as the glare does not affect me as much.
Ted T.
I finally broke down and bought a new screen protector. Thought the plastic from faction was fine but after a few months it got dirty and sticky even after cleaning it. The nee screen protector was easy to install and makes swiping much easier now. I definitely give it a thump up
AJ P.
Easy to install! The sides matches up real well.
Tony
Ever since I got the car I always wondered when a good quality screen protector will be made. I came across this one and figured I'll give it a try. Turns out the glass is very clear and fit the screen very well. The manufacturer even accounted for the flat top and curved bottom of the Tesla screen. Installation is very straightforward if you're used to phone screen protector. It even include several wipes to make sure that everything is clean before putting the glass on.
Dominic R.
When I first got my model 3 in June of 2018 I bought a screen protector but it didn't fit right. There was too much curvature and it was comically bad. I took another chance now that companies have had a chance to get their hands on the cars and this time I wasn't disappointed. It's as easy/hard to install as any other screen protector, comes with a few wipes and dry cloths to make sure there is no dust on the screen. There is a subtle difference between the top and the bottom (the bottom has an ever so slight curve). Doesn't attract fingerprints either.
Ben J.
Bought and installed on my week old Tesla Model 3. Great addition to keep the screen looking good. Couple of notes:
Use screen clean mode!
Use wipes 1 & 2, and then the larger microfiber. Much cleaner that way.
Don’t wipe in circles, lines only.
There is a top and bottom. If you see a gap at the bottom, switch it around. For me, the pull tab for the sticky side was in the upper left when installed correctly.
Use the guide stickers on left, middle, and right, but not directly in the corners. You will want to see them to line up correctly. 1/2 sticker on the protector and 1/2 above.
Press the stickers down firmly in the back of the display! It will help hold in place.
Use your phone light to look for dust before removing backing.
Remove backing and slowly let the sticky side flow on the screen left to right.
Clean and remove bubbles with the thick microfiber cloth included.
For me, the top and sides need to be amazing and the bottom worked out good too. Installed dozens of these protectors on phones and that was good practice.
Kev S.
Excellent quality and perfect fit!
I had bought one from another store for my model S, but it didnt fit and I returned them. These, for my Model 3, fit perfectly! Can't even see the corners! Highly recommend!