Glossy Carbon Fiber Trunk Spoiler for Tesla Model 3 Trunk Lip Spoiler Wing Rear Spoiler Lip Kit Exterior Rear Spoiler Kit for Tesla Model 3 2017 2018 2019. (Glossy)
Features:
- ❶ The Carbon Fiber Spoiler is suitable for Tesla Model 3 2017 2018 2019 2020.
- ❷ It is made of light weight & top-grade durable 100% Real carbon fiber material with a glossy finish, make your car more luxurious.
- ❸ The glossy spoiler is eye-catching, it make the good performance in decorating the car, make your car more cool, stylish.
- ❹ In addition to enhancing the appearance, the rear wing can maintain the stability of the vehicle when in high speeds, reducing wind resistance, saveing fuel and keeping safety, make the driver to feel more comfortable.
- ❺ It is eary to install, peel off the 3M tape on the back, then stick the spolier on the lid of trunk.
Details: Features: In addition to the aesthetics of the mounting tail, the greater effect is to use the airflow to generate the downward pressure to make the tire grip the ground and improve the driving stability. Installation steps 1. Clean the trunk and remove any dirt or leftover water. This will ensure a strong bond with the bumper. 2. Peel the backing off of one end of the lip. Position the tape so that the lip is protruding towards you .Make sure to press firmly. 3. Continue to peel and attached to the rest of the trunk making sure the lip is even as you do. Note: 1. Do not touch water after pasting within 48 hours. 2. Adhesiveness is weaker when the temperature below 20 degrees, use with heat gun to heat the thermal double-sided adhesive will be better.
Features:
- ❶ The Carbon Fiber Spoiler is suitable for Tesla Model 3 2017 2018 2019 2020.
- ❷ It is made of light weight & top-grade durable 100% Real carbon fiber material with a glossy finish, make your car more luxurious.
- ❸ The glossy spoiler is eye-catching, it make the good performance in decorating the car, make your car more cool, stylish.
- ❹ In addition to enhancing the appearance, the rear wing can maintain the stability of the vehicle when in high speeds, reducing wind resistance, saveing fuel and keeping safety, make the driver to feel more comfortable.
- ❺ It is eary to install, peel off the 3M tape on the back, then stick the spolier on the lid of trunk.
Details: Features: In addition to the aesthetics of the mounting tail, the greater effect is to use the airflow to generate the downward pressure to make the tire grip the ground and improve the driving stability. Installation steps 1. Clean the trunk and remove any dirt or leftover water. This will ensure a strong bond with the bumper. 2. Peel the backing off of one end of the lip. Position the tape so that the lip is protruding towards you .Make sure to press firmly. 3. Continue to peel and attached to the rest of the trunk making sure the lip is even as you do. Note: 1. Do not touch water after pasting within 48 hours. 2. Adhesiveness is weaker when the temperature below 20 degrees, use with heat gun to heat the thermal double-sided adhesive will be better.