Marion O.
This puddle light is awesome if you've got a Tesla. The Tesla-T is prominent but not annoying when it shines on the floor.
Installing the projector into the door was pretty straight forward. You have to make sure the little wire does not snap back up into the door by accident, but you'll be able to grab it pliers or a screwdriver if you lose it.
You do not have to cut or splice anything - the existing wire plugs directly into the new projector but you'll have to work the plug into the new socket. The new socket was pretty snug but it does fit. I came in at a 45-deg angle to get the plug started into the socket then straightened it up before making full contact.
The lense was not adjusted correctly and was actually turned 180 degrees the wrong way on the passenger door. I had to pop the casing apart and rotate the lens correctly. This can be done with a small flathead screwdriver and GENTLY prying off the white/clear case from the black body. You might have to scrape or break away the light glue holding them together around the snap points. Just take your time and you'll get the case apart.
After that, you'll able to remove the lens and turn it appropriately and display as you need.
I would still purchase another set!
X N.
You need two pairs for four doors; The install is super easy as long as you figure out how to look up the light under the door from below, a creeper would help a lot. The lights come out very nicely, the Tesla logo has clear edge and looks very cool, highly recommended!
V C.
Easy install once I figured it out. Looks great on my brand new Tesla model Y (vin 614).
P B.
I emailed the seller/company about the alignment not being perfect, and they sent me directions on how to fix this. It seems the directions didn't apply to the specific light they sent me, so they ended up sending me a new one as a replacement for free. The new one is perfect and my OCD is pleased! Thank you for standing behind your product, these look awesome!!
Allison L.
Very nice! Love it so cool
Leah
I just put these on my MY and they are much brighter than I was expecting
They look great. Love them !
Joselyn S.
Fits great on Model Y. Easy to install.
Dennis S.
Installation tip.
You just need a small flat head screw driver and your other hand. I've tried using a tablet opening tool, but the plastic was not firm enough, and screw driver did not scratch the paint. It needed just little force to pull out.
Once it's out, you need stick the screw driver into plastic cable clip part to effectively separate the wire part and the light casing. After that, click in the new light casing and place it back to the door.
I installed it during daytime and I could only verify its direction and function on my hand and forgot about it. When my sister saw it at night, it had a WOW factor and she thought it was factory installed.
I'm buying two more for the rear doors as well. I thought front two would be good enough, but this makes the original look too cheap.
Jeffrey
Turned out great! Very easy to install if you have the right tools. I have them installed under the driver and passenger doors.
C T.
Easy to install. Just pry out the existing light assembly with thin common screwdriver. Press release tab and pull from wire connector from light. Reverse steps to install new lights assembly. Look good. They have "L" & "R" labels on them so make sure you put the right one in the correct door.
L
installed 4 of them in under 5 mins, nice fit, very clear and bright image
L R.
These lights are AMAZING! I need to purchase another set now as my kids want them on their back doors! These lights arrived quickly and were super easy to install. We didn’t have any instructions in our box but we honestly didn’t even need them. The old lights popped out and these went right in. The only trick I have, is they are not labeled left and right. Before popping it back in place, test it. The first time we had the symbol the wrong way but in no time we had it out and back in. It maybe took 2 minutes to install on both sides. It took longer to open the box from amazon then it did to install them. These are a must have and we have gotten lots of compliments on them! I was worried they wouldn’t provide as much lights as the original puddle lights but I was wrong! These are actually brighter than the original lights. Will definitely be ordering another set!
S F.
Nice addition to my 2020 Model Y
It was a little hard to initially get the OEM light out in the beginning, but I found out using a little screwdriver to help assist with the little push made it much easier. (If I’m a girl and I mostly do shopping and I can get these lights input - you can do it too!!)
Make sure to get 2 sets to equal 4 lights.
Unless you just want the front doors.
Before popping them back in MAKE SURE that the Logo is pointed in the right direction you want it to face.
There was one side that needed that extra push to get it into the slot but don’t worry just add a little pressure and it will pop right in.
Looks amazing
Don’t know why this isn’t an included item on a car in this price range as other luxury vehicles include it at half the price.
D D.
Very easy to install. I installed both in under 10 minutes. Watched the YouTube video and off I went. I used the spunger from a iPhone screen replacement kit but any one or similar tool will work.
S H.
This is pretty cool. Factory light comes out easy and this one is a little bit hard to get in hole but with some pressure it snaps in.
Jim R.
Simple to install and looks great. Projects a bug bright Tesla logo. Very happy so far.
John B.
Awesome easy install and very cool
Vish
Worked well, nice and bright light! Great diy update.
Luis M.
I had bough a pair previously from a different seller and the plug in did not fit. This pair fit perfectly. The only complain is that it is not as bright as the pictures make it seem. It is still noticeable and adds a nice touch but it is not brighter than the stock puddle light.
Jennifer C.
These lights came quick in the mail and with easy to follow instructions. They even give a link to watch a youtube video which is really helpful. I removed the old lights and installed the new ones in 2 minutes and I'd never done it before. Love this modification and the lights are really bright. Definitely recommend!
Hieu
These are decent. Be careful as you'll want to align the logo before pushing in place. Once it's fitted in, pulling it out will usually result in the cap separating from the housing and you'll struggle with a needle nose plier trying to pull the housing out. Also the logo lense will want to fall out as well. Take your time and install it how you like it on the first go around.
L L.
Overall, it's okay and it works as expected. The T's seem to be upside down like in one of the photos someone posted. I tried to flip it the other way but the cable inside was too short so I couldnt.
I also have to say that removing them is pretty difficult, so I hope they last. Installing was pretty straight forward though.
Satisfied with the purchase but could be better for the reasons above.
K B.
Works great. Nothing to really compare them to in terms of brightness, but they seem bright enough to me. Look great!
R K.
The Tesla puddle lights for the car looks great and it definitely turns on to a conversation starter at nights. I love the lights.
Steve
These are as easy to install as any of the other replacement bulbs. But the emblem looks great and unique at night. Great value!
Shay R.
Great product , well made and works well. The quality of the plastic is the same as OEM. THis is so good it should have come with the car should have come with the car !
Paul A.
I loved how easy it was to install, comes with instructions, it took me about 7 mins total, and it’s an amazing touch to your model 3.
It’s very bright and will definitely make your model 3 stand out amongst some of the other ones around you, especially at night ! I 100% recommended.
Avina
These are awesome! I was skeptical at first but turned out great. The hologram is pretty bright and big
Queen B.
They're easy to install. My kids was like " wow it's so cool" lol... They're nice & quality is good so yeah thumbs up for us :))
QUYNH N.
Very cool to look at the Tesla light shining on the floor every time you open the doors especially at night.
A C.
Bright and easy to install. Wish it came with spudger tool to remove lights but fortunately had a similar tool that did the trick. Not sure what the extra wires are for, didn’t use them. Kids love having the T on their doors!
Kristian B.
I'd seen other versions of this product that clamined to be compatible for S, X and 3. I thought I'd give this one a try for my X. It's a little bit of a tight squeeze on the inside of the door. This light is a little deeper than the one it replaces, maybe a 1/4" or so. On the X, that last quarter inch starts to run into the interior of the door, so you have to work it a little bit. Ultimately it fits snugly and works great if you work it into place. 5 minute install per side.
Michael
Initially I was skeptical since I've tried a similar product which made a very annoying buzzing sound. This one does not have that issue and installs in about 2 minutes. Make sure you use a spudger to not damage your product.
