Color Changing LED Door Sills for Tesla Model S, 3, X, and Y (Hardwired)

Color Changing LED Door Sills for Tesla Model S, 3, X, and Y (Hardwired)

Available: In Stock
$499.99 FREE Shipping
Shopping Icons

Stylish Car Lighting Accessories
This Tesla LED door sill is a personalized car lighting. When you open the door, the door sill panel will light up (turn off as the door closed) and display the name and logo of the vehicle.

Well Protect And Good Lighting Guide
It can well protect the original door sill of the car from scratches and damage. If you want to cover an already scratched door sill, our door sills guards are also a good choice. The bright light when the door is opened also provides sufficient illumination for entering and exiting the car.

Waterproof And Dustproof
IP67. You don't need to worry about rain and snow weather will get wet and dirty the led door sill. It is made of acrylic, and the smooth surface is easy to clean.

Specifications:

Fitted for the car front doors and rear doors
Voltage: 12V
Current: less than 0.5A
Waterproof rating: IP67
Material: Japanese Acrylic + High brightness LED
Thickness: 0.4cm~0.5cm
Colors Mode:
Single Color Option: Red, Blue, White, Yellow, Green, Rose red (7 color);
Multi-color Option: Colorful (Auto-Changing: change 7 color automatic), Multi-color (Remote Control: 7 colors and 4 flash mode adjustable);

IMPORTANT: By default, our light effect is flashing, if you want to let it stay on (after opening the door), please reach out to us and let us know that you want it to  "stay on."

Installation:

Step 1: Test if the led door sills are working properly.
Step 2: Clean the position of the installation with isopropyl alcohol and dry it with a microfiber towel.
Step 3: Connect the positive and negative wires to the power supply of the door switch sensor. (red wire connects to the positive and black wire connects to the negative.)
Step 4: Tear off the 3M tape on the back of the door sill pedal, and attach the door sill pedal to the install location.
Step 5: Tidy up the wires and the installation is complete.
(Hard-wiring it to your Tesla's 12v battery won’t invalid your car warranty.)

Installation Disclaimers:

-Different models have different shapes and sizes of door sill, so their installation method may differ.
-For some models, the factory door sill can be directly covered by the LED door sill panels, while other models might need to disassemble the factory door sill and replace it with LED door sill pedals.
-The acrylic door sill pedals couldn't cover the curved area of the doorsteps.
-Hard-wiring, hands-on capability required.

 

Demo Video

Color Changing LED Door Sills for Tesla Model S, 3, X, and Y from The EV Shop on Vimeo.

 


Stylish Car Lighting Accessories
This Tesla LED door sill is a personalized car lighting. When you open the door, the door sill panel will light up (turn off as the door closed) and display the name and logo of the vehicle.

Well Protect And Good Lighting Guide
It can well protect the original door sill of the car from scratches and damage. If you want to cover an already scratched door sill, our door sills guards are also a good choice. The bright light when the door is opened also provides sufficient illumination for entering and exiting the car.

Waterproof And Dustproof
IP67. You don't need to worry about rain and snow weather will get wet and dirty the led door sill. It is made of acrylic, and the smooth surface is easy to clean.

Specifications:

Fitted for the car front doors and rear doors
Voltage: 12V
Current: less than 0.5A
Waterproof rating: IP67
Material: Japanese Acrylic + High brightness LED
Thickness: 0.4cm~0.5cm
Colors Mode:
Single Color Option: Red, Blue, White, Yellow, Green, Rose red (7 color);
Multi-color Option: Colorful (Auto-Changing: change 7 color automatic), Multi-color (Remote Control: 7 colors and 4 flash mode adjustable);

IMPORTANT: By default, our light effect is flashing, if you want to let it stay on (after opening the door), please reach out to us and let us know that you want it to  "stay on."

Installation:

Step 1: Test if the led door sills are working properly.
Step 2: Clean the position of the installation with isopropyl alcohol and dry it with a microfiber towel.
Step 3: Connect the positive and negative wires to the power supply of the door switch sensor. (red wire connects to the positive and black wire connects to the negative.)
Step 4: Tear off the 3M tape on the back of the door sill pedal, and attach the door sill pedal to the install location.
Step 5: Tidy up the wires and the installation is complete.
(Hard-wiring it to your Tesla's 12v battery won’t invalid your car warranty.)

Installation Disclaimers:

-Different models have different shapes and sizes of door sill, so their installation method may differ.
-For some models, the factory door sill can be directly covered by the LED door sill panels, while other models might need to disassemble the factory door sill and replace it with LED door sill pedals.
-The acrylic door sill pedals couldn't cover the curved area of the doorsteps.
-Hard-wiring, hands-on capability required.

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)